J.I. Case 220

J.I. Case 220The J.I. Case 220 is a garden tractor model manufactured from 1968 to 1988 by J.I. Case in Winneconne, Wisconsin, USA. It was available in two-wheel drive (2WD) version.

The J.I. Case 220 is equipped with a 391 cc (23.9 cu·in) single-cylinder gasoline engine with 82.6 mm (3.25 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke, and a hydrostatic transmission with infinite forward and reverse (2-range) gears.

The J.I. Case 220 garden tractor features:

  • The Kohler K241AS gasoline engine which produces 10.2 PS (7.5 kW; 10.0 HP) at 3,600 rpm of horsepower.
  • Manual steering
  • Band brakes
  • Open operator station
  • Sleeve hitch

General specifications

General Specifications
ModelJ.I. Case 220
Tractor typeGarden tractor
Production years1968-1988
FactoryWinneconne, Wisconsin, USA
Dimensions and weight
Length1,650 mm (65 in)
Width930 mm (36.6 in)
Height (steering wheel)1,010 mm (39.8 in)
Wheel base1,160 mm (45.7 in)
Ground clearance180 mm (7.1 in)
Weight (shipping)324 kg (714 lbs)
Fuel capacity
Fuel tank capacity11.4 liters (3 US gal.; 2.5 Imp. gal)

Engine

Engine Specifications
Engine modelKohler K241AS
Engine type4-stroke, L-head (side valve), single-cylinder
Displacement391 cm3, (23.86 cu·in)
Bore and stroke82.6 mm X 73.0 mm (3.25 in X 2.87 in)
Max. horsepower10.2 PS (7.5 kW; 10.0 HP) at 3,600 rpm
Cooling systemForced air
Lubricating systemSplash type
Ignition systemBattery ignition system
Fuel systemCarburetor
Starting systemElectirc starter
Compression pressure
Normal:7.7-8.4 kg/cm2 (7.6-8.3 bar, 110-120 psi) / 1,000 rpm
Valve clearance
Intake valve clearance:0.20-0.25 mm (0.0079-0.0098 in)
Exhaust valve clearance:0.43-0.48 mm (0.0169-0.0189 in)
Oil system
Lubrication system:Splash type
Oil type:API SF or SG
Recommended oil: Summer: SAE 30W
Winter: SAE 5W-20, 5W-30
Oil capacity:1.4 L (1.5 US. qt, 1.2 Imp. qt.)
Ignition system
Spark plug:Champion RH10
Spark plug gap:0.65 mm (0.0256 in)
Spark plug torque:27 N·m (2.8 kg·m, 19.9 ft·lb)

Transmission and chassis

Chassis, steering and brakes
Chassis4×2 2WD
Steering typeManual
BrakesBand
Transmission
Transmission manufacturer or modelHY-Drive
Transmission typeHydrostatic
GearsInfinite forward and reverse (2-range)
Speed Forward: 15.1 kmh (9.4 mph)
Reverse: 15.1 kmh (9.4 mph)
Transmission oil capacity6.2 L (1.6 US. gal, 1.4 Imp. gal.)

Tires

Tires
Front tires Ag: 6.50-8
Rear tires Ag: 8.00-16, 8.50-12, 10.50-12

Rear Hitch

Three-Point Hitch
CategorySleeve hitch
Control type
Lift capacity (at ends)

Electrical system

Electrical system
GroundNegative
Charging systemAlternator
Charging amps15A
Battery12V, 24Ah

Hydraulic system

Hydraulic system
Hydraulic typeOpen center
Hydraulic capacity5.7 L (1.5 US. gal, 1.3 Imp. gal.)
Pressure2000 psi (137.9 bar)
Pump flow8.0 gpm (30.3 lpm)

Attachments

J.I. Case 38″ mid-mount mower deck
Cutting width:960 mm (38 in)
J.I. Case 44″ mid-mount mower deck
Cutting width:1,110 mm (44 in)
J.I. Case 44″ front-mount blade
Cutting width:1,110 mm (44 in)
J.I. Case 38″ front-mount snowblower
Cutting width:960 mm (38 in)
Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Be the first to comment

Leave a Reply

Your email address will not be published.


*