Husqvarna YTH24K48 lawn tractor specs and service data

The Husqvarna YTH24K48 is a lawn tractor model manufactured from 2012 by Husqvarna. It was available in two-wheel drive (2WD) version.

The Husqvarna YTH24K48 is equipped with a 0.7 L (44.2 cu·in) two-cylinder gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 67.0 mm (2.64 in) of the piston stroke, and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The Husqvarna YTH24K48 lawn tractor features:

The Kohler SV725 gasoline engine which produces 24.3 PS (17.9 kW; 24.0 HP) at 3,600 rpm of horsepower.
Open operator station
Independent front PTO with with electric clutch

General specifications

General Specifications
Model	Husqvarna YTH24K48
Tractor type	Lawn tractor
Production years	2012-
Factory	–
Dimensions and weight
Length	1,760 mm (69.3 in)
Width	1,290 mm (50.8 in)
Height	1,050 mm (41.3 in)
Wheel base	1,210 mm (47.6 in)
Weight	222 kg (489 lbs)
Fuel capacity
Fuel tank capacity	11.4 liters (3 US gal.; 2.5 Imp. gal)

Engine

Engine
Engine model	Kohler SV725
Engine type	Four-stroke, air-cooled, V-twin
Cylinders	2
Fuel type	Gasoline
Displacement	725 cm³, (44.2 cu·in)
Bore and stroke	83.0 mm X 67.0 mm (3.27 in X 2.64 in)
Compression ratio	9.0:1
Horsepower	24.3 PS (17.9 kW; 24.0 HP) at 3,600 rpm
Starter	Electric
Oil system
Lubrication system:	Full pressurized
Oil type:	API SJ or higher
Recommended oil:	SAE 10W-30
Oil capacity (with filter):	1.9 L (2.0 US. qt, 1.7 Imp. qt.)
Ignition system
Spark plug:	Champion RC12YC
Spark plug gap:	0.76 mm (0.0299 in)
Spark plug torque:	27 N·m (2.8 kg·m, 19.9 ft·lb)
Valve clearance
Intake valve clearance:	0.101-0.152 mm (0.004-0.006 in)
Exhaust valve clearance:	0.101-0.152 mm (0.004-0.006 in)

Transmission and chassis

Chassis, steering and brakes
Chassis	4×2 2WD
Steering type	–
Brakes	–
Transmission
Transmission manufacturer or model	Tuff Torq K57
Transmission type	Belt-driven hydrostatic
Gears	Infinite forward and reverse
Speed	Forward: 12.6 kmh (7.8 mph) Reverse: 4.7 kmh (2.9 mph)

Tires

Tires
Front tires	Lawn/turf: 15×6-6
Rear tires	Lawn/turf: 20×8-8

PTO (Power take-off shaft)

PTO
Middle PTO type	Independent with electric clutch
Middle PTO speed	–

Electrical system

Electrical system
Ground	Negative
Charging system	–
Charging amps	16A
Battery	12V, Group U1R, 28Ah, CCA 230A

Attachments

Husqvarna 48″ mid-mount mower deck with 3-blade
Cutting width	1,210 mm (48 in)
Cut height	30-100 mm (1.5-4 in)
Cut positions	4

Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

R. Wayne Raulerson says:
May 26, 2026 at 9:30 pm
I’m confused I bought a used 2012 Husqvarna YTH24K48 with a 24 HP Kohler Courage engine. I wanted to change oil and learned some list 4.5 quarts and other sites that says 2.0 quarts. I’ve put two quarts and it does not register on the dip stick. Now I don’t know if I have the right dip stick. My dip stick has a place for two rubber rings and it is on the bottom groove, and will not go all the way down. What do I do? Thanks

Husqvarna YTH24K48