Craftsman DGT4000 garden tractor specs and service data

The Craftsman DGT4000 is a garden tractor model from the DGT series, manufactured during 2001 by AYP for distributor Craftsman (a part of Sears). It was available in two-wheel drive (2WD) version.

The Craftsman DGT4000 is equipped with a 674 cc (41.1 cu·in) two-cylinder gasoline engine with 80.0 mm (3.15 in) of the cylinder bore and 67.0 mm (2.64 in) of the piston stroke, and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The Craftsman DGT4000 garden tractor features:

The Kohler LV675 gasoline engine which produces 23.4 PS (17.2 kW; 23.0 HP) at 3,600 rpm of horsepower
Manual steering
Open operator station
Sleeve hitch (optional)
Independent middle PTO with electric clutch
Lawn/turf tires front: 16×7.5-8, rear 24×12-12
13.2 liters (3.5 US gal.; 2.9 Imp. gal)

General specifications

General Specifications
Model	Craftsman DGT4000 (917.27524)
Tractor type	Garden tractor
Production years	2001
Factory
Dimensions and weight
Length	–
Width	–
Height	–
Wheel base	–
Weight	–
Fuel capacity
Fuel tank capacity	13.2 liters (3.5 US gal.; 2.9 Imp. gal)

Engine

Engine
Engine model	Kohler LV675
Engine type	Four-stroke, liquid-cooled, V-twin
Cylinders	2
Fuel type	Gasoline
Displacement	674 cm³, (41.1 cu·in)
Bore and stroke	80.0 mm X 67.0 mm (3.15 in X 2.64 in)
Compression ratio	8.5:1
Horsepower	23.3 PS (17.1 kW; 23.0 HP) at 3,600 rpm
Max. torque	44.0 N·m (4.5 kg·m, 32.4 ft·lb) at 2,400 rpm
Starter	Electric 12V
Oil system
Lubrication system:	Full pressurized
Oil type:	API SJ or higher
Recommended oil:	SAE 10W-30
Oil capacity:	1.9 L (2.01 US. qt, 1.67 Imp. qt.)
Ignition system
Spark plug:	Champion RC14YC
Spark plug gap:	0.76 mm (0.030 in)
Spark plug torque:	27 N·m (2.8 kg·m, 19.9 ft·lb)
Cooling system
Coolant capacity:	1.4 L (1.5 US. qt, 1.2 Imp. qt.)

Transmission and chassis

Chassis, steering and brakes
Chassis	4×2 2WD
Steering type	Manual
Brakes	–
Transmission
Transmission manufacturer or model	Hydro-Gear BDU-10L
Transmission type	Belt-driven hydrostatic
Gears	Infinite forward and reverse
Speed	Forward: 9.3 kmh (5.8 mph) Reverse: 3.4 kmh (2.1 mph)

Tires

Tires
Front tires	Ag: 16×7.5-8
Rear tires	Ag: 24×12-12

Rear Hitch

Three-Point Hitch
Category	Sleeve hitch (optional)
Control type	–
Lift capacity (at ends)	–

PTO (Power take-off shaft)

PTO
Middle PTO type	Independent with electric clutch
Middle PTO speed	–

Electrical system

Electrical system
Ground	Negative
Charging system	–
Charging amps	15A
Battery	12V, CCA 280A, Group U1R

Attachments

Craftsman 48″ mid-mount mower deck with 3-blade and manual lift
Cutting width	1,210 mm (48 in)
Drive system	Belt
Craftsman 24412: 48″ front-mount blade with manual-lift and manual-angle
Cutting width	1,210 mm (48 in)
Craftsman 24846: 46″ front-mount two-stage snowblower with manual-lift
Cutting width	1,160 mm (46 in)

Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Craftsman DGT4000