Toro Wheel Horse 314-H specs and service data

The Toro Wheel Horse 314-H is a garden tractor model from the Classic 300 series, manufactured from 1993 to 1997 by Toro. It was available in two-wheel drive (2WD) version.

The Toro Wheel Horse 314 Hydro is equipped with a 512 cc (31.2 cu·in) single-cylinder gasoline engine with 89.0 mm (3.5 in) of the cylinder bore and 83.0 mm (3.27 in) of the piston stroke, and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The Toro Wheel Horse 314-H garden tractor features:

The Kohler M14S gasoline engine which produces 14.3 PS (10.4 kW; 14.0 HP) at 3,600 rpm of horsepower
Manual steering
Band brakes
Open operator station
Independent middle PTO with manual clutch
16.1 liters (4.3 US gal.; 3.5 Imp. gal)
Lawn/turf 15×6.00-6 front tires and 23×9.50-12 rear tires

General specifications

General Specifications
Model	Toro Wheel Horse 314-H
Tractor type	Garden tractor
Production years	1993-1997
Factory	–
Dimensions and weight
Length	1,650 mm (65 in)
Width	920 mm (36.2 in)
Height (steering wheel)	1,070 mm (42.1 in)
Wheel base	1,150 mm (45.3 in)
Weight	282 kg (622 lbs)
Fuel capacity
Fuel tank capacity	16.1 liters (4.3 US gal.; 3.5 Imp. gal)

Engine

Engine
Engine model	Kohler Magnum M14S
Engine type	4-stroke, L-head, single-cylinder
Displacement	512 cm³, (31.27 cu·in)
Compression ratio:	7.0:1
Cylinder bore:	88.9 mm (3.50 in)
Piston stroke:	82.6 mm (3.25 in)
Max. horsepower	14.3 PS (10.4 KW; 14.0 HP) at 3,600 rpm
Max. torque	–
Cooling system	Forced air
Air cleaner	High-density paper
Lubricating system	Splash
Ignition system	Electronic magneto ignition system
Fuel system	Side-draft carburetor with adjustable jet
Fuel tank capacity	5.7 liters (1.5 US gal, 1.3 Imp. gal)
Fuel used	Unleaded gasoline (octane number 86 or higher)
Starting system	Recoil or electric starter
Governor	Centrifugal governor
PTO shaft rotation	Counterclockwise (from PTO shaft side)
Intake valve clearance:	0.20-0.25 mm (0.0079-0.0098 in)
Exhaust valve clearance:	0.43-0.48 mm (0.0169-0.0189 in)
Oil system
Lubrication system:	Splash
Oil type:	API SF or SG
Recommended oil:	Summer: SAE 30 Winter: SAE 5W-20, 5W-30
Oil capacity:	1.9 L (2.00 US. qt, 1.67 Imp. qt.)
Ignition system
Type:	Electronic magneto ignition system
Spark plug:	Champion RH10
Spark plug gap:	0.65 mm (0.0256 in)
Spark plug torque:	27 N·m (2.8 kg·m, 19.9 ft·lb)
Ignition coil air gap	0.30-0.40 mm (0.012-0.016 in)

Transmission and chassis

Chassis, steering and brakes
Chassis	2WD
Steering type	Manual
Brakes	Band
Transmission
Transmission manufacturer or model	Eaton
Transmission type	Belt-driven hydrostatic
Gears	Infinite forward and reverse
Speed	Forward: 9.0 kmh (5.6 mph) Reverse: 5.5 kmh (3.4 mph)

Tires

Tires
Front tires	Lawn/turf: 15×6.00-6
Rear tires	Lawn/turf: 23×9.50-12

PTO (Power take-off shaft)

PTO
Middle PTO type	Independent with manual clutch
Middle PTO speed	–

Electrical system

Electrical system
Ground	Negative
Charging system	–
Charging amps	–
Battery	12V, CCA 210A

Attachments

Toro Wheel Horse 36″ mid-mount mower deck with 3-blade, right-discharge and manual lift
Cutting width:	910 mm (36 in)
Weight:	46 kg (102 lbs)
Toro Wheel Horse 42″ mid-mount mower deck with 3-blade, right-discharge and manual lift
Cutting width:	1,060 mm (42 in)
Weight:	61 kg (135 lbs)
Toro Wheel Horse 48″ mid-mount mower deck with 3-blade, right-discharge and manual lift
Cutting width:	1,210 mm (48 in)
Weight:	76 kg (168 lbs)
Toro 48″ front-mount blade with manual lift and manual angle
Cutting width:	1,210 mm (48 in)
Toro 42″ single-stage front-mount snow blower with manual lift
Cleaning width:	1,060 mm (42 in)
Toro 42″ two-stage front-mount snow blower with manual lift
Cleaning width:	1,210 mm (48 in)

Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Toro Wheel Horse 314-H