Kubota B1410 sub-compact utility tractor specs and service data

The Kubota B1410 is a sub-compact utility tractor model from the B series, manufactured by Kubota in Japan. It was available in four-wheel drive (4WD) version.

The Kubota B1410D is equipped with a 656 cc (40.0 cu·in) three-cylinder diesel engine with 64.0 mm (2.52 in) of the cylinder bore and 68.0 mm (2.68 in) of the piston stroke, and a gear type transmission with 6 forward and 2 reverse gears.

The Kubota B1410 sub-compact utility tractor features:

The Kubota D662-D14 diesel engine which produces 13.1 PS (9.6 KW; 13.0 HP) at 3,200 rpm of horsepower and 37.0 Nm (3.77 kg·m; 27.31 ft·lb) at 2,800 rpm of peak torque
Manual steering
Wet disc type brakes
Open operator station
Category I rear hitch with 540 kg (1,191 lbs) of maximum lift capacity
Middle PTO with 2,500 rpm
Rear PTO with 540/1000 rpm.

General specifications

General Specifications
Model	Kubota B1410
Tractor type	Sub-compact utility tractor
Production years	–
Factory	Japan
Dimensions and weight
Length	2,035 mm (80.1 in)
Width	930 mm (36.6 in)
Height	1,230 mm (48.4 in)
Wheel base	1,270 mm (50 in)
Ground clearance	240 mm (9.4 in)
Weight	510 kg (1,124 lbs)
Fuel capacity
Fuel tank capacity	13.0 liters (3.4 US gal.; 2.9 Imp. gal)

Engine

Engine Specifications
Engine model	Kubota D662-D14
Engine type	4-stroke, vertical, three-cylinders
Displacement	656 cm³, (40.0 cu·in)
Compression ratio:	23.0:1
Cylinder bore:	64.0 mm (2.52 in)
Piston stroke:	68.0 mm (2.68 in)
Horsepower	DIN70020: 13.1 PS (9.6 KW; 13.0 HP) at 3,200 rpm At PTO-shaft: 11.0 PS (8.1 KW; 10.9 HP)
Max. torque	37.0 Nm (3.77 kg·m; 27.31 ft·lb) at 2,800 rpm
Emission type	–
Cooling system	Liquid-cooled
Lubricating system	Forced lubrication by pump
Combustion chamber	Spherical type
Fuel injection pump	Bosch MD type mini pump
Injection nozzle	Bosch throttle type
Fuel used	Diesel fuel No.2-D
Starting system	Electric starter (12V, 0.8 kW)
Starting support device	Glow plug in combustion chamber
Governor	Centrifugal ball mechanical governor
PTO shaft rotation	Counterclockwise (from PTO shaft side)
Dimensions (L x W X H)	426 x 398 x 519 mm (16.8 x 15.7 x 20.4 in)
Cylinder compression pressure
Cylinder compression:	29.0-33.0 kgf/cm² (2.84-3.24 MPa, 412-469 psi)
Compression differential limit between cylinders:	10% or less
Valve clearance
Intake valve clearance:	0.145-0.185 mm (0.0057-0.0073 in)
Exhaust valve clearance:	0.145-0.185 mm (0.0057-0.0073 in)
Oil system
Lubrication system:	Forced lubrication by pump
Oil type:	API CD or CE
Oil capacity:	2.4 liters (2.54 US.qts, 2.11 Imp. qts)
Oil filter:	Full flow paper filter (cartridge type)
Oil pressure:	At idle spped: 98 kPa (1.0 kgf/cm², 14 psi) At rated speed: 196-441 kPa (2.0-4.5 kgf/cm², 29-64 psi)
Fuel system
Fuel injection pump	Bosch MD-type mini pump
Injection nozzle	Bosch throttle type
Fuel injection pressure	13.73-14.71 MPa (140-150 kgf/cm2, 1991-2133 psi)
Cooling system
Type:	Pressurized radiator, forced circulation with water pump (not included in the basic engine)
Thermostat’s valve opening temperature:	69.5-72.5°C (157.1-162.5°F)
Temperature at which thermostat completely opens:	85°C (185°F)
Coolant capacity:	2.6 liters (2.75 US.qts, 2.29 Imp. qts)

Transmission and chassis

Chassis, steering and brakes
Chassis	4×4 MFWD 4WD
Steering type	Manual
Brakes	Wet disc type
Transmission
Transmission manufacturer or model	–
Transmission type	Gear type
Gears	6 forward and 2 reverse
Speed	Forward: 15.1 kmh (9.4 mph) Reverse: 6.2 kmh (3.9 mph)
Transmission oil capacity	10.5 L (2.8 US. gal, 2.3 Imp. gal.)

Tires

Tires
Front tires	Ag: 4.5-10 Lawn/turf: 20×8.00-10
Rear tires	Ag: 7-16 Lawn/turf: 212/80D-15

Rear Hitch

Three-Point Hitch
Category	I
Control type	–
Lift capacity (at ends)	540 kg (1,191 lbs)

PTO (Power take-off shaft)

PTO
Middle PTO type	–
Middle PTO speed	2,500 rpm
Rear PTO type	–
Rear PTO speed	540/1000 rpm

Electrical system

Electrical system
Ground	Negative
Charging system	Alternator
Charging amps	–
Battery	12V, CCA 390A

Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Kubota B1410