John Deere 175

John Deere 175The John Deere 175 is a lawn tractor model from the Late 100 Lawn series, manufactured from 1987 to 1990 by John Deere in Horicon, Wisconsin, USA. It was available in two-wheel drive (2WD) version.

The John Deere 175 is equipped with a 423 cc (25.8 cu·in) single-cylinder gasoline engine with 89.0 mm (3.5 in) of the cylinder bore and 68.0 mm (2.68 in) of the piston stroke, and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The JD 175 lawn tractor features:

  • The Kawasaki FC420V gasoline engine which produces 14.1 PS (10.4 kW; 14.0 HP) at 3,600 rpm of horsepower
  • Manual sector-and-pinion steering
  • Integral mechanical transmission disc brakes
  • Open operator station

General specifications

General Specifications
Model John Deere 175
Tractor type Lawn tractor
Production years 1987-1990
Factory Horicon, Wisconsin, USA
Dimensions and weight
Length 1,650 mm (65 in)
Width
Height 990 mm (39 in)
Wheel base 1,130 mm (44.5 in)
Weight 275 kg (606 lbs)
Fuel capacity
Fuel tank capacity 8.3 liters (2.2 US gal.; 1.8 Imp. gal)

Engine

Engine
Engine model Kawasaki FC420V
Engine type Four-stroke, air-cooled
Cylinders 1
Fuel type Gasoline
Displacement 0.4 L, 423 cm3, (25.8 cu·in)
Bore and stroke 89.0 mm X 68.0 mm (3.5 in X 2.68 in)
Compression ratio 8.4:1
Horsepower 14.1 PS (10.4 kW; 14.0 HP) at 3,600 rpm
Starter Electric
Oil system
Lubrication system: Full pressurized
Oil type: 4-stroke or an equivalent (SF, SE, SD)
Recommended oil: SAE 10W-30, 10W-40
Oil capacity: 1.4 L (1.5 US. qt, 1.2 Imp. qt.)
Ignition system
Spark plug: NGK BPR5ES or Champion RN11YC
Spark plug gap: 0.7-0.8 mm (0.0276-0.0315 in)
Valve clearance
Intake valve clearance: 0.15 mm (0.006 in)
Exhaust valve clearance: 0.15 mm (0.006 in)

Transmission and chassis

Chassis, steering and brakes
Chassis 4×2 2WD
Steering type Manual sector-and-pinion
Brakes Integral mechanical transmission disc
Transmission
Transmission manufacturer or model Eaton Model 7
Transmission type Belt-driven hydrostatic
Gears Infinite forward and reverse
Speed Forward: 8.0 kmh (5.0 mph)
Reverse: 4.0 kmh (2.5 mph)
Transmission oil capacity 0.7 L (0.2 US. gal, 0.2 Imp. gal.)

Tires

Tires
Front tires Lawn/turf: 15×6.00-6
Rear tires Lawn/turf: 18×8.50-8

PTO (Power take-off shaft)

PTO
Front PTO type Independent with electric clutch
Front PTO speed

Electrical system

Electrical system
Ground Negative
Charging system Flywheel alternator
Charging amps 13A
Battery 12V, CCA: 255A

Serial numbers

John Deere 175 serial numbers
1987 M00175X420001
1988 M00175X475001
1989 M00175X595001
1989-end M00175X750000
1990 M00175X010001
Final M00175X100000

Attachments

John Deere 38″ mid-mount mower deck with 2-blade and manual lift
Cutting width 960 mm (38 in)
Overall width 1,260 mm (49.7 in)
Cut height 20-100 mm (1-4 in)
John Deere 2690M: 42″ front-mount blade with manual-lift and manual-angle
Width 1,060 mm (42 in)
Height 380 mm (15 in)
Lift 120 mm (5 in)
Weight 28 kg (62 lbs)
John Deere 2640M: 38″ front-mount, single-stage snowblower with manual-lift
Width 960 mm (38 in)
ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Be the first to comment

Leave a Reply

Your email address will not be published.


*