The Honda H4514 is a lawn tractor with Honda GX360 general-purpose engine 0.36 l (359 cc). The Honda H4514H is equipped with hydrostatic transmission and 965 mm (38 in.) or 1190 mm (42 in.) mower deck. The mower deck is adjustable in seven increments for cutting heights between 25 mm (1 in.) and 100 mm (4 in). The Honda H4514 lawn tractor was produced from 1990 to 1998.
The Honda GX360 is two cylinders water-cooled gasoline engine. It develops 13.2 PS (13 HP, 9.7 kW) at 3600 rpm of maximum horsepower and 25.7 Nm (2.54 kg·m, 19 ft·lb) at 3,000 rpm of peak torque. The GX360 engine has an electric starter and transistorized ignition. This engine has a 58.0 mm (2.3 in) of the cylinder bore and 68.0 mm (2.7 in) of the piston stroke, and 8.5:1 compression ratio rating.
The Honda H4514 lawn tractor is equipped with hydrostatic transmission. This transmission has three approximate ground speeds: “Reverse” to 3.4 km/h (2.1 mph), “Mowing” to 5.1 km/h (3.2 mph) and “Transport” to 7.6 km/h (4.7 mph)
General information
| General Specifications | ||
| Model | Honda H4514H | |
| Length | 1,815 mm (71.5 in) | |
| Width | 38 inch deck type: 1,270 mm (50.0 in) 42 inch deck type: 1,460 mm (57.5 in) | |
| Height | 1,050 mm (41.3 in) | |
| Wheel base | 1190 mm (46.9 in.) | |
| Dry weight | 38 inch deck type: 258.0 kg (569.0 lbs) 42 inch deck type: 270.0 kg (595.0 lbs) | |
| Fuel tank capacity | 9.0 l (2.38 US gal., 1.98 Imp gal.) | |
| Battery | 12V-30AH | |
| Engine | ||
| Engine model | Honda GX360 K1 | |
| Displacement | 359 cm3 (21.9 cu-in) | |
| Bore x stroke | 58.0 X 68.0 mm (2.3 x 2.7 in) | |
| Max. horsepower | 13.2 PS (13 HP, 9.7 kW) at 3600 rpm | |
| Max. torque | 25.7 Nm (2.54 kg·m, 19 ft·lb) at 3000 rpm | |
| Carburetor | Horizontal type, butterfly valve | |
| Cooling system | Liquid-cooling | |
| Ignition system | Transistorized magneto ignition | |
| Lubricating system | Forced oil by trochoid pump | |
| Starting system | Electric starter | |
| Stoping system | Ignition primary circuit ground | |
| Fuel used | Unleaded gasoline (octane number 86 or higher) | |
| Hydrostatic type transmission | ||
| Type | Oil pressure-type variable-speed transmission | |
| Groung speeds | Reverse: 3.4 km/h (2.1 mph) Mowing: 5.z km/h (3.2 mph) Transport: 7.6 km/h (4.7 mph) | |
| Wheels and tires | ||
| Front tires size | 15×6.0-6 | |
| Front tires pressure | 98 kPa (1.0 kg/cm2, 14 psi) | |
| Rear tires size | 20.5×8.5-10 | |
| Rear tires pressure | 79 kPa (0.8 kg/cm2, 11.4 psi) | |
| Mower Deck | ||
| Deck size | 965 mm (38 in.) or 1,060 mm (42 in.) | |
| Height range | 25-100 mm (1-4 in.) | |
Maintenance data
| Engine | |
| Idle speed | 1,300 ± 150 rpm |
| Cylinder compression | 12.0 kg/cm2 (171 psi) at 500 rpm |
| Valve clearance | |
| Intake valve | 0.10-0.14 mm (0.004-0.006 in) |
| Exhaust valve | 0.10-0.14 mm (0.004-0.006 in) |
| Carburetor | |
| Main jet | #88 |
| Float height | 13.2 mm (0.52 in) |
| Pilot screw opening | 1-1/4 turns out |
| Oil system | |
| Oil type | Honda 4-stroke or an equivalent (SE or SF) |
| Recommended oil | SAE 10W-40 |
| Oil capacity (without filter changed) | 1.1 L (1.16 US qt) |
| Oil capacity (with filter changed) | 1.4 L (1.48 US qt) |
| Oil pressure (min) | 2.0 kg/cm2 (28.4 psi) |
| Cooling system | |
| Coolant capacity (radiator and engine) | 2.0 L (2.11 US qt) |
| Coolant capacity (reserve tank) | 0.4 L (0.43 US qt) |
| Coolant capacity (total system) | 2.4 L (2.54 US qt) |
| Thermostat | |
| Sub valve (start opening) | 77° C (171° F) |
| Sub valve (fully open) | 82° C (180° F) |
| Sub valve (lift height) | 1.5 mm (0.06 in) |
| Main valve (fully open) | 85 ° C (185 ° F) |
| Sub valve (lift height) | 6.5 mm (0.26 in) |
| Thermoswitch | |
| Temperature range for continuity | 110° ± 2° C (230° ± 36° C) |
| Oil pump | |
| Tip clearance (standard) | 0.15 mm (0.006 in) |
| Outer rotor clearance (standard) | 0.12-0.22 mm (0.005-0.009 in) |
| Rotor-to-pump body clearance (standard) | 0.04-0.09 mm (0.0016-0.0035 in) |
| Ignition system | |
| Ignition timing | 24 ° ± 4 ° B.T.D.C (Fixed) |
| Spark plug | NGK: BPR4HS, DENSO: W14FPR-UL |
| Spark plug gap | 0.6-0.7 mm (0.024-0.028 in) |
| Primary side ignition coil resistance | 0.9-1.1 kΩ |
| Secondary side ignition coil resistance | 8.8-13.2 kΩ |
| Ignition coil air gap | 0.4 ± 0.2 (0.016 ± 0.008) |
| Starter motor | |
| Brush length | 14 mm (0.55 in), limit: 9.0 mm (0.35 in) |
| Mica depth (limit) | 0.2 mm (0.008 in) |
| Hydrostatic transmission lube | |
| Transmission oil type | Honda hydrostatic transmission oil |
Attachments
| Honda 38″ mid-mount mower deck | |
| Cutting width | 960 mm (38 in) |
| Honda 42″ mid-mount mower deck | |
| Cutting width | 1,060 mm (42 in) |
Author:
Be the first to comment