Craftsman DGT6000

Craftsman

The Craftsman DGT6000 is a garden tractor model manufactured from 2003 to 2004 by AYP for distributor Craftsman (a part of Sears). It was available in a two-wheel drive (2WD) version.

The Craftsman DGT6000 is equipped with a 0.7 L (44.2 cu·in) two-cylinder gasoline engine with 83.0 mm (3.27 in) cylinder bore and 67.0 mm (2.64 in) of the piston stroke, and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The Craftsman DGT6000 garden tractor features:

  • The Kohler CV740 gasoline engine which produces 27.3 PS (20.1 kW; 27.0 HP) at 3,600 rpm of horsepower
  • Manual steering
  • Mechanical disc brakes
  • Open operator station
  • Independent PTO with electric clutch
  • 18.9 liters (5.0 US gal) fuel tank
  • Front tires: 16×7.50-8; rear tires: 24×12.0-12

The Craftsman DGT6000 variants:

  • 917.27528 (2003): the Kohler Command PRO CV740 engine, the Hydro-Gear 311-3500 hydrostatic transmission and 48 inches (1,210 mm) mower deck with 3-blade and manual lift
  • 917.27612 (2004): the Kohler Command PRO CV740 engine, the Hydro-Gear 311-3500 hydrostatic transmission and 54 inches (1,370 mm) mower deck with 3-blade and hydraulic lift

General specifications

General Specifications
ModelCraftsman DGT6000
Tractor typeGarden tractor
Production years2003-2004
Factory–
Dimensions and weight
Length–
Width–
Height–
Wheel base–
Weight–
Fuel capacity
Fuel tank capacity18.9 liters (5.0 US gal.; 4.2 Imp. gal)

Engine

Engine

Engine
Engine modelKohler CV740
Engine typeFour-stroke, air-cooled, V-twin
Cylinders2
Fuel typeGasoline
Displacement725 cm3, (44.2 cu·in)
Bore and stroke83.0 mm X 67.0 mm (3.27 in X 2.64 in)
Compression ratio9.0:1
Horsepower27.3 PS (20.1 kW; 27.0 HP) at 3,600 rpm
Max. torque57.9 N·m (5.9 kg·m, 42.7 ft·lb)
StarterElectric
Oil system
Lubrication system:Full pressurized
Oil filter:Full-flow
Oil type:API SG, SH, SJ, or higher
Recommended oil:SAE 10W-30
Oil capacity:1.9 L (2.0 US.qts, 1.7 Imp. qts)
Ignition system
Spark plug:Champion RC12YC
Spark plug gap:0.76 mm (0.030 in)
Spark plug torque:27 N·m (2.8 kg·m, 19.9 ft·lb)

Transmission and chassis

Chassis, steering and brakes
Chassis4×2 2WD
Steering typeManual
BrakesMechanical disc
Transmission
Transmission manufacturer or modelHydro-Gear 311-3500
Transmission typeBelt-driven hydrostatic
GearsInfinite forward and reverse
Speed Forward: 9.3 kmh (5.8 mph)
Reverse: 4.3 kmh (2.7 mph)

Tires

Tires
Front tires Lawn/turf: 16×7.50-8
Rear tires Lawn/turf: 24×12.0-12

PTO (Power take-off shaft)

PTO
PTO typeIndependent with electric clutch
PTO speed3000 rpm

Electrical system

Electrical system
GroundNegative
Charging system–
Charging amps15A
Battery12V, CCA 280A, Group U1R

Attachments

Craftsman 48″ mid-mount mower deck with 3-blade and manual lift
Cutting width1,210 mm (48 in)
Cut height37-115 mm (1.5-4.5 in)
Cut positions6
Drive systemBelt AYP 191273
Craftsman 54″ mid-mount mower deck with 3-blade and manual lift
Cutting width1,370 mm (54 in)
Cut height37-115 mm (1.5-4.5 in)
Cut positions6
Drive systemBelt AYP 191273
Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Be the first to comment

Leave a Reply

Your email address will not be published.


*