Kubota L210 tractor specs and service data

The Kubota L210 is a compact utility tractor model from the L-series, manufactured from 1972 to 1973 by Kubota in Japan. It was available in two-wheel drive (2WD) version.

The Kubota L210 is equipped with a 1.1 L (65.3 cu·in) two-cylinder diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 88.0 mm (3.46 in) of the piston stroke, and a sliding gear transmission with 6 forward and 2 reverse gears.

The Kubota L210 compact utility tractor features:

The Kubota Z1100A diesel engine which produces 21.4 PS (15.7 kW; 21.0 HP) at 2,700 rpm of horsepower
Manual steering
Differential mechanical expanding shoe brakes
Open operator station
Category I rear hitch with 930 kg (2051 lbs) of maximum lift capacity
Rear PTO with 650/990 rpm

General specifications

General Specifications
Model	Kubota L210
Tractor type	Compact utility tractor
Production years	1972-1973
Factory	Japan
Dimensions and weight
Length	1,940 mm (76.4 in)
Width	1,120 mm (44.1 in)
Height	1,890 mm (74.4 in)
Wheelbase	1,490 mm (58.7 in)
Ground clearance	340 mm (13.4 in)
Weight	980 kg (2,161 lbs)
Fuel capacity
Fuel tank capacity	24.0 liters (6.3 US gal.; 5.3 Imp. gal)

Engine

Engine Specifications
Engine model	Kubota Z1100A
Engine type	4-stroke, vertical, two-cylinders
Displacement	1,070 cm³, (65.3 cu·in)
Compression ratio:	20.0:1
Cylinder bore:	88.0 mm (3.46 in)
Piston stroke:	88.0 mm (3.46 in)
Max. horsepower	21.1 PS (15.5 kW; 21.0 HP) at 2,700 rpm
Max. torque	60.0 Nm (6.12 kg·m; 44.28 ft·lb) at 1,600 rpm
Cooling system	Liquid-cooled
Lubricating system	Forced lubrication by pump
Combustion chamber	–
Fuel system	Fuel injection pump (ND-PFR 2K-70)
Injection type	Indirect injection (N-12 SD)
Fuel used	Diesel fuel No.2-D
Starting system	Electric starter 12V, 0.9 kW
Governor	Centrifugal ball mechanical governor
PTO shaft rotation	Counterclockwise (from PTO shaft side)
Valve tappet gap
Intake valve:	0.20-0.25 mm (0.0079-0.0098 in)
Exhaust valve:	0.20-0.25 mm (0.0079-0.0098 in)
Oil system
Lubrication system:	Forced lubrication
Oil type:	DS or DM
Recommended oil:	SAE 80
Oil capacity:	5.0 L (5.28 US. qt, 4.4 Imp. qt.)
Fuel system
Injection timing:	25° B.T.D.C.
Fuel injection pressure	13.73-14.71 MPa (140-150 kgf/cm2, 1991-2133 psi)
Cooling system
Type:	Pressurized radiator, forced circulation with water pump
Coolant capacity:	6.9 liters (7.3 US.qts, 6.1 Imp. qts)

Transmission and chassis

Chassis, steering and brakes
Chassis	4×2 2WD
Steering type	Manual
Brakes	Differential mechanical expanding shoe
Transmission
Transmission manufacturer or model	–
Transmission type	Sliding gear
Gears	6 forward and 2 reverse
Speed	Forward: 18.1 kmh (11.2 mph) Reverse: 4.4 kmh (2.7 mph)
Transmission oil capacity	12.2 L (3.2 US. gal, 2.7 Imp. gal.)

Tires

Tires
Front tires	Ag:: 4.0-15
Rear tires	Ag:: 9.5-24

Rear Hitch

Three-Point Hitch
Category	I
Control type	–
Lift capacity (at ends)	930 kg (2,051 lbs)

PTO (Power take-off shaft)

PTO
Rear PTO type	–
Rear PTO speed	650/990 rpm

Electrical system

Electrical system
Ground	Negative
Charging system	Alternator
Charging amps	10A
Battery	12V, 80Ah or equivalent

Hydraulic system

Hydraulic system
Hydraulic type	Open center with gear pump
Hydraulic capacity	7.03 L (1.9 US. gal, 1.5 Imp. gal.)
Pressure	1420 psi (97.9 bar)
Total flow	2.85 gpm (10.8 lpm)

Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Kubota L210