John Deere 175 lawn tractor specs and service data

The John Deere 175 is a lawn tractor model from the Late 100 Lawn series, manufactured from 1987 to 1990 by John Deere in Horicon, Wisconsin, USA. It was available in two-wheel drive (2WD) version.

The John Deere 175 is equipped with a 423 cc (25.8 cu·in) single-cylinder gasoline engine with 89.0 mm (3.5 in) of the cylinder bore and 68.0 mm (2.68 in) of the piston stroke, and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The JD 175 lawn tractor features:

The Kawasaki FC420V gasoline engine which produces 14.1 PS (10.4 kW; 14.0 HP) at 3,600 rpm of horsepower
Manual sector-and-pinion steering
Integral mechanical transmission disc brakes
Open operator station

General specifications

General Specifications
Model	John Deere 175
Tractor type	Lawn tractor
Production years	1987-1990
Factory	Horicon, Wisconsin, USA
Dimensions and weight
Length	1,650 mm (65 in)
Width	–
Height	990 mm (39 in)
Wheel base	1,130 mm (44.5 in)
Weight	275 kg (606 lbs)
Fuel capacity
Fuel tank capacity	8.3 liters (2.2 US gal.; 1.8 Imp. gal)

Engine

Engine
Engine model	Kawasaki FC420V
Engine type	Four-stroke, air-cooled
Cylinders	1
Fuel type	Gasoline
Displacement	0.4 L, 423 cm³, (25.8 cu·in)
Bore and stroke	89.0 mm X 68.0 mm (3.5 in X 2.68 in)
Compression ratio	8.4:1
Horsepower	14.1 PS (10.4 kW; 14.0 HP) at 3,600 rpm
Starter	Electric
Oil system
Lubrication system:	Full pressurized
Oil type:	4-stroke or an equivalent (SF, SE, SD)
Recommended oil:	SAE 10W-30, 10W-40
Oil capacity:	1.4 L (1.5 US. qt, 1.2 Imp. qt.)
Ignition system
Spark plug:	NGK BPR5ES or Champion RN11YC
Spark plug gap:	0.7-0.8 mm (0.0276-0.0315 in)
Valve clearance
Intake valve clearance:	0.15 mm (0.006 in)
Exhaust valve clearance:	0.15 mm (0.006 in)

Transmission and chassis

Chassis, steering and brakes
Chassis	4×2 2WD
Steering type	Manual sector-and-pinion
Brakes	Integral mechanical transmission disc
Transmission
Transmission manufacturer or model	Eaton Model 7
Transmission type	Belt-driven hydrostatic
Gears	Infinite forward and reverse
Speed	Forward: 8.0 kmh (5.0 mph) Reverse: 4.0 kmh (2.5 mph)
Transmission oil capacity	0.7 L (0.2 US. gal, 0.2 Imp. gal.)

Tires

Tires
Front tires	Lawn/turf: 15×6.00-6
Rear tires	Lawn/turf: 18×8.50-8

PTO (Power take-off shaft)

PTO
Front PTO type	Independent with electric clutch
Front PTO speed	–

Electrical system

Electrical system
Ground	Negative
Charging system	Flywheel alternator
Charging amps	13A
Battery	12V, CCA: 255A

Serial numbers

John Deere 175 serial numbers
1987	M00175X420001
1988	M00175X475001
1989	M00175X595001
1989-end	M00175X750000
1990	M00175X010001
Final	M00175X100000

Attachments

John Deere 38″ mid-mount mower deck with 2-blade and manual lift
Cutting width	960 mm (38 in)
Overall width	1,260 mm (49.7 in)
Cut height	20-100 mm (1-4 in)
John Deere 2690M: 42″ front-mount blade with manual-lift and manual-angle
Width	1,060 mm (42 in)
Height	380 mm (15 in)
Lift	120 mm (5 in)
Weight	28 kg (62 lbs)
John Deere 2640M: 38″ front-mount, single-stage snowblower with manual-lift
Width	960 mm (38 in)

Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

John Deere 175