Cub Cadet 102 lawn tractor specs and service data

The Cub Cadet 102 is a lawn tractor model from the 1X2/1X3 series, manufactured from 1965 to 1967 by Cub Cadet (a part of International Harvester) in Louisville, Kentucky, USA. It was available in a two-wheel drive (2WD) version.

The Cub Cadet 102 is equipped with a 391 cc (23.9 cu·in) single-cylinder gasoline engine with 82.6 mm (3.25 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke, and shaft-driven gear type transmission with 3 forward and 1 reverse gear with dry disc clutch (6 forward and 2 reverse gears with creeper).

The Cub Cadet 102 lawn tractor features:

The Kohler K241AS gasoline engine which produces 10.2 PS (7.5 kW; 10.0 HP) at 3,600 rpm of horsepower
Manual steering
Dry disc brakes
Open operator station
Independent front PTO
Transmission rear PTO

General specifications

General Specifications
Model	Cub Cadet 102
Tractor type	Lawn tractor
Production years	1965-1967
Factory	Louisville, Kentucky, USA
Dimensions and weight
Length	1,600 mm (63 in)
Width	840 mm (33.1 in)
Height	1,010 mm (39.8 in)
Wheel base	1,090 mm (42.9 in)
Weight	353 kg (778 lbs)
Fuel capacity
Fuel tank capacity	6.2 liters (1.6 US gal.; 1.4 Imp. gal)

Engine

Engine Specifications
Engine model	Kohler K241AS
Engine type	4-stroke, L-head (side valve), single-cylinder
Displacement	391 cm³, (23.86 cu·in)
Bore and stroke	82.6 mm X 73.0 mm (3.25 in X 2.87 in)
Compression ratio	7.0:1
Max. horsepower	10.2 PS (7.5 kW; 10.0 HP) at 3,600 rpm
Cooling system	Forced air
Lubricating system	Splash type
Ignition system	Battery ignition system
Fuel system	Carburetor
Starting system	Electirc starter
Compression pressure
Normal:	7.7-8.4 kg/cm² (7.6-8.3 bar, 110-120 psi) / 1,000 rpm
Valve clearance
Intake valve clearance:	0.20-0.25 mm (0.0079-0.0098 in)
Exhaust valve clearance:	0.43-0.48 mm (0.0169-0.0189 in)
Oil system
Lubrication system:	Splash type
Oil type:	API SF or SG
Recommended oil:	Summer: SAE 30W Winter: SAE 5W-20, 5W-30
Oil capacity:	1.2 L (1.27 US. qt, 1.06 Imp. qt.)
Ignition system
Type:	Battery ignition system
Spark plug:	Champion RH10
Spark plug gap:	0.65 mm (0.0256 in)
Spark plug torque:	27 N·m (2.8 kg·m, 19.9 ft·lb)

Transmission and chassis

Chassis, steering and brakes
Chassis	4×2 2WD
Steering type	Manual
Brakes	Dry disc
Transmission
Transmission manufacturer or model	–
Transmission type	Shaft-driven gear type with dry disc clutch
Gears	3 forward and 1 reverse
Speed	Forward: 11.1 kmh (6.9 mph) Reverse: 4.0 kmh (2.5 mph)
Transmission № 2
Transmission manufacturer or model	–
Transmission type	Creeper
Gears	6 forward and 2 reverse
Speed	Forward: 2.7 kmh (1.7 mph) Reverse: 1.0 kmh (0.6 mph)

Tires

Tires
Front tires	Lawn/turf: 4.80×4.00-8, 16×6.50-8
Rear tires	Lawn/turf: 6-12, 23×8.50-12

PTO (Power take-off shaft)

PTO
Front PTO type	Independent
Front PTO speed	–
Rear PTO type	Transmission
Rear PTO speed	–

Electrical system

Electrical system
Ground	Negative
Charging system	Generator
Charging amps	–
Battery	12V

Serial numbers

Cub Cadet 102 serial numbers
1965	127161
1966	137051
1967	180268
Final	218009

Attachments

Cub Cadet: 38″ mower deck with 3-blade and manual lift
Cutting width	960 mm (38 in)
Cutting height:	20-100 mm (1-4 in)
Cub Cadet: 42″ mower deck with 3-blade and manual lift
Cutting width	1,060 mm (42 in)
Cutting height:	20-100 mm (1-4 in)
Cub Cadet: 48″ mower deck with 3-blade and manual lift
Cutting width	1,210 mm (48 in)
Cutting height:	20-100 mm (1-4 in)
Cub Cadet 42″ blade and manual lift and manual angle
Cutting width	1,060 mm (42 in)
Height:	400 mm (16 in)
Cub Cadet 36″ front-mount snow blower with manual lift
Cleaning width	910 mm (36 in)

Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Cub Cadet 102