Cub Cadet 105 garden tractor specs and service data

The Cub Cadet 105 is a garden tractor model from the 1X4/1X5 series, manufactured from 1967 to 1969 by Cub Cadet (a part of International Harvester) in Louisville, Kentucky, USA. It was available in two-wheel drive (2WD) version.

The Cub Cadet 105 is equipped with a 391 cc (23.9 cu·in) single-cylinder gasoline engine with 82.6 mm (3.25 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke, and a hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet 105 garden tractor features:

The Kohler K241AS gasoline engine which produces 10.2 PS (7.5 kW; 10.0 HP) at 3,600 rpm of horsepower
Manual steering
Drum brakes
Open operator station
Cub Cadet three-point hitch
Independent front PTO with mechanical clutch with 3,600 rpm

General specifications

General Specifications
Model	Cub Cadet 105
Tractor type	Garden tractor
Production years	1967-1969
Factory	Louisville, Kentucky, USA
Dimensions and weight
Length	1,620 mm (63.8 in)
Width	840 mm (33.1 in)
Height	1,000 mm (39.4 in)
Wheel base	1,090 mm (42.9 in)
Ground clearance	150 mm (5.9 in)
Weight	283 kg (624 lbs)
Fuel capacity
Fuel tank capacity	6.2 liters (1.6 US gal.; 1.4 Imp. gal)

Engine

Engine Specifications
Engine model	Kohler K241AS
Engine type	4-stroke, L-head (side valve), single-cylinder
Displacement	391 cm³, (23.86 cu·in)
Bore and stroke	82.6 mm X 73.0 mm (3.25 in X 2.87 in)
Compression ratio	7.0:1
Max. horsepower	10.2 PS (7.5 kW; 10.0 HP) at 3,600 rpm
Cooling system	Forced air
Lubricating system	Splash type
Ignition system	Battery ignition system
Fuel system	Carburetor
Starting system	Electirc starter
Compression pressure
Normal:	7.7-8.4 kg/cm² (7.6-8.3 bar, 110-120 psi) / 1,000 rpm
Valve clearance
Intake valve clearance:	0.20-0.25 mm (0.0079-0.0098 in)
Exhaust valve clearance:	0.43-0.48 mm (0.0169-0.0189 in)
Oil system
Lubrication system:	Splash type
Oil type:	API SF or SG
Recommended oil:	Summer: SAE 30W Winter: SAE 5W-20, 5W-30
Oil capacity:	1.4 L (1.5 US. qt, 1.2 Imp. qt.)
Ignition system
Type:	Battery ignition system
Spark plug:	Champion RH10
Spark plug gap:	0.65 mm (0.0256 in)
Spark plug torque:	27 N·m (2.8 kg·m, 19.9 ft·lb)

Transmission and chassis

Chassis, steering and brakes
Chassis	4×2 2WD
Steering type	Manual
Brakes	Drum
Transmission
Transmission manufacturer or model	Sundstrand
Transmission type	Hydrostatic
Gears	Infinite forward and reverse
Speed	Forward: 12.9 kmh (8 mph) Reverse: 6.4 kmh (4 mph)
Transmission oil capacity	6.6 L (1.7 US. gal, 1.5 Imp. gal.)

Tires

Tires
Front tires	Lawn/turf: 4.80×4.00-8
Rear tires	Lawn/turf: 6-12

Rear Hitch

Three-Point Hitch
Category	Cub Cadet three-point
Control type	–
Lift capacity (at ends)	–

PTO (Power take-off shaft)

PTO
Front PTO type	Independent with mechanical clutch
Front PTO speed	3,600 rpm

Electrical system

Electrical system
Ground	Negative
Charging system	Generator
Charging amps	15A
Battery	12V

Serial numbers

Cub Cadet 105 serial numbers
1967	218010
1968	225056
1969	280840
Final	306085

Attachments

Cub Cadet 38QA: 38″ mower deck with 3-blade and manual lift
Cutting width	960 mm (38 in)
Cutting height:	20-100 mm (1-4 in)
Cub Cadet 42QA: 42″ mower deck with 3-blade and manual lift
Cutting width	1,060 mm (42 in)
Cutting height:	20-100 mm (1-4 in)
Cub Cadet 48QA: 48″ mower deck with 3-blade and manual lift
Cutting width	1,210 mm (48 in)
Cutting height:	20-100 mm (1-4 in)
Cub Cadet 42″ blade and manual lift and manual angle
Cutting width	1,060 mm (42 in)
Height:	400 mm (16 in)
Cub Cadet 36″ front-mount snow blower with manual lift
Cleaning width	910 mm (36 in)
Cub Cadet 42″ front-mount snow blower with manual lift
Cleaning width	1,060 mm (42 in)

Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Cub Cadet 105