Craftsman DGS6500

Craftsman DGS6500The Craftsman DGS6500 is a garden tractor model from the DGS6500 series, manufactured during 2008 by AYP for distributor Craftsman (a part of Sears). It was available in two-wheel drive (2WD) version.

The Craftsman DGS6500 917.28845 is equipped with a 725 cc (44.2 cu·in) V-twin OHV gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 67.0 mm (2.64 in) of the piston stroke, and a gear type transmission with 6 forward and 1 reverse gears or a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The Craftsman DGS6500 garden tractor features:

  • The Kohler SV735 gasoline engine which produces 26.4 PS (19.4 kW; 26.0 HP) at 3,600 rpm of horsepower
  • Manual sector and pinion steering
  • Mechanical disc brakes
  • Open operator station
  • Independent PTO with electric clutch (2,800 rpm)
  • 15.1 liters (4.0 US gal.; 3.3 Imp. gal) fuel tank
  • 16×6.50-6 front tires, and 23×10.50-8 rear tires

The Craftsman DGS6500 variants:

  • 917.28845 (California emissions 917.28645) the Kohler SV735 engine, the Peerless P820-040 gear type transmission and 54 inches mower deck
  • 917.28846 (California emissions 917.28646) the Kohler SV735 engine, the Tuff Torq K-66 hydrostatic transmission and 54 inches mower deck
  • 917.28848 the Kohler SV735 engine, the Tuff Torq K-66 hydrostatic transmission and 48 inches mower deck
  • 917.28848 the Kohler SV735 engine, the Tuff Torq K-66Y hydrostatic transmission and 54 inches mower deck

General specifications

General Specifications
Model Craftsman DGS6500
Tractor type Garden tractor
Production years 2008
Factory
Dimensions and weight
Length
Width
Height
Wheel base
Weight 267 kg (589 lbs)
Fuel capacity
Fuel tank capacity 15.1 liters (4 US gal.; 3.3 Imp. gal)

Engine

Engine
Engine model Kohler SV735
Engine type Four-stroke, air-cooled, V-twin
Cylinders 2
Fuel type Gasoline
Displacement 725 cm3, (44.2 cu·in)
Bore and stroke 83.0 mm X 67.0 mm (3.27 in X 2.64 in)
Compression ratio 9.0:1
Horsepower 26.4 PS (19.4 kW; 26.0 HP) at 3,600 rpm
Max. torque 56.2 Nm (5.73 kg·m; 41.48 ft·lb) at 2,400 rpm
Starter Electric
Oil system
Lubrication system: Full pressurized
Oil filter: Full-flow
Oil type: API SJ or higher
Recommended oil: SAE 10W-30
Oil capacity: 1.8 L (1.9 US. qt, 1.6 Imp. qt.)
Ignition system
Spark plug: Champion RC12YC
Spark plug gap: 0.76 mm (0.0299 in)
Spark plug torque: 27 N·m (2.8 kg·m, 19.9 ft·lb)
Valve clearance
Intake valve clearance: 0.101-0.152 mm (0.004-0.006 in)
Exhaust valve clearance: 0.101-0.152 mm (0.004-0.006 in)

Transmission and chassis

Chassis, steering and brakes
Chassis 4×2 2WD
Steering type Manual sector and pinion
Brakes Mechanical disc
Transmission (917.28845)
Transmission manufacturer or model Peerless P820-040
Transmission type Gear type
Gears 6 forward and 1 reverse
Speed Forward: 7.0 kmh (4.4 mph)
Reverse: 2.1 kmh (1.3 mph)
Transmission (917.28846, 917.28848)
Transmission manufacturer or model Tuff Torq K-66
Transmission type Belt-driven hydrostatic
Gears Infinite forward and reverse
Speed Forward: 9.3 kmh (5.8 mph)
Reverse: 3.4 kmh (2.1 mph)
Transmission (917.28848)
Transmission manufacturer or model Tuff Torq K-66Y
Transmission type Belt-driven hydrostatic
Gears Infinite forward and reverse
Speed Forward: 9.3 kmh (5.8 mph)
Reverse: 3.4 kmh (2.1 mph)

Tires

Tires
Front tires Lawn/turf: 16×6.5×6
Rear tires Lawn/turf: 23×10.5×8

PTO (Power take-off shaft)

PTO
PTO type Independent with electric clutch
PTO speed 2,800 rpm

Electrical system

Electrical system
Ground Negative
Charging system Alternator
Charging amps 15A
Battery 12V, CCA 280A, Group U1R

Attachments

Craftsman 48″ mid-mount mower deck with 3-blade and manual lift
Cutting width 1,210 mm (48 in)
Cut height 37-100 mm (1.5-4 in)
Cut positions 7
Drive system Belt
Craftsman 54″ mid-mount mower deck with 3-blade and manual lift
Cutting width 1,370 mm (54 in)
Cut height 37-100 mm (1.5-4 in)
Cut positions 7
Drive system Belt
ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Be the first to comment

Leave a Reply

Your email address will not be published.


*