Cub Cadet XT1 LT42

Cub Cadet XT1 LT42The Cub Cadet XT1 LT42 is a lawn tractor model from the XT1 Enduro Series series, manufactured from 2015 to by Cub Cadet (a part of MTD). It is available in a two-wheel-drive (2WD) version.

The Cub Cadet XT1 LT42 is equipped with a 0.6 L (36.4 cu·in) single-cylinder gasoline engine with 94.0 mm (3.7 in) of the cylinder bore and 86.0 mm (3.39 in) of the piston stroke, and a belt-driven hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet XT1 LT42 lawn tractor features:

  • The Kohler SV541 gasoline engine which produces 18.2 PS (13.4 kW; 18.0 HP) at 3,600 rpm of horsepower.
  • Manual steering
  • Disc brakes
  • Open operator station
  • Independent front PTO with manual clutch

General specifications

General Specifications
ModelCub Cadet XT1 LT42
Tractor typeLawn tractor
Production years2015-
Factory
Dimensions and weight
Length1,720 mm (67.7 in)
Width
Height1,070 mm (42.1 in)
Wheel base1,190 mm (46.9 in)
Weight185 kg (408 lbs)
Fuel capacity
Fuel tank capacity11.4 liters (3 US gal.; 2.5 Imp. gal)

Engine

Engine
Engine modelKohler SV541
Engine typeFour-stroke, air-cooled
Cylinders1
Fuel typeGasoline
Displacement535 cm3, (32.6 cu·in)
Bore and stroke89.0 mm X 86.0 mm (3.5 in X 3.39 in)
Compression ratio8.5:1
Horsepower18.2 PS (13.4 kW; 18.0 HP) at 3,600 rpm
Torque43.5 N·m (4.4 kg·m, 32.1 ft·lb) at 2,200 rpm
StarterElectric
Oil system
Lubrication system:Full pressurized
Oil type:API SJ or higher
Recommended oil:SAE 10W-30
Oil capacity (with filter):1.2 L (1.3 US. qt, 1.1 Imp. qt.)
Ignition system
Spark plug:Champion RC12YC
Spark plug gap:0.76 mm (0.0299 in)
Spark plug torque:27 N·m (2.8 kg·m, 19.9 ft·lb)
Valve clearance
Intake valve clearance:0.127 mm (0.005 in)
Exhaust valve clearance:0.178 mm (0.007 in)

Transmission and chassis

Chassis, steering and brakes
Chassis4×2 2WD
Steering typeManual
BrakesDisc
Transmission
Transmission manufacturer or modelTuff Torq K46
Transmission typeBelt-driven hydrostatic
GearsInfinite forward and reverse
Speed Forward: 8.8 kmh (5.5 mph)
Reverse: 5.0 kmh (3.1 mph)

Tires

Tires
Front tiresLawn/turf: 15×6
Rear tiresLawn/turf: 20×8

PTO (Power take-off shaft)

PTO
Rear PTO typeIndependent with manual clutch
Rear PTO speed

Electrical system

Electrical system
GroundNegative
Charging systemFlywheel alternator
Charging amps12A
Battery12V, CCA 230

Attachments

Cub Cadet 42″ mid-mount mower deck with 2-blade and manual with spring-assist lift
Cutting width1,060 mm (42 in)
Overall width1,270 mm (50 in)
Cut height20-100 mm (1-4 in)
Cut positions12
Cub Cadet: 46″ front-mount blade
Width1,160 mm (46 in)
Cub Cadet: 42″ front-mount three-stage snowblower with manual lift
Width1,060 mm (42 in)
Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Be the first to comment

Leave a Reply

Your email address will not be published.


*