The Honda H3011 is a riding lawn mower with Honda GXV340K1 vertical PTO shaft general-purpose general-purpose engine (337 cc, 20.6 cu-in) and 760 mm (30 in.) belt-driven mower deck. The mower deck is adjustable in six increments for cutting heights between 25.0 mm (1 in.) and 90.0 mm (3.5 in).
The Honda GXV340K1 motor is an air-cooled single-cylinder four-stroke gasoline engine with vertical PTO shaft. It has an 82.0 mm (3.23 in) of the cylinder bore and 64.0 mm (2.5 in) of the piston stroke. Compression ratio rating is 7.7:1. The GXV340K1 motor produces 11.0 HP (8.2 kW) at 3,600 rpm of maximum output power and 23.0 Nm (2.3 kg·m, 17.0 ft·lb) at 2,500 rpm of torque.
The Honda H3011 is available with two transmissions:
- The gear type transmission uses parallel shaft, constant mesh and sliding key. The gear transmission has five forward gears with traveling speed from 2.4 km/h to 7.9 km/h (1.5 mph to 4.9 mph) and one reverse gear 2.8 km/h (1.7 mph).
- The hydrostatic transmission. The transmissiom has three approximate ground speeds: “Reverse” from 0 to 2.7 km/h (0-1.7 mph), “Mowing” from 0 to 5.3 km/h (0-3.3 mph) and “Transport” from 5.3 to 7.2 km/h (3.2-5.3 mph).
General information
| General Specifications | ||
| Model | Honda H3011 / H3011H | |
| Modifications | H3011/H3011SA – model with Mechanical Auto-clutch Transmission (MAT); H3011H/H3011HSA – model with Hydrostatic Transmission (HST); | |
| Length | H3011: 1550 mm (61.0 in) H3011H: 15450 mm (60.8 in) | |
| Width | H3011: 1070 mm (42.1 in) H3011H: 1050 mm (41.3 in) | |
| Height | 1000 mm (39.4 in) | |
| Wheel base | 1100 mm (43.3 in.) | |
| Dry weight | H3011: 162.0 kg (364.0 lbs) H3011H: 178.0 kg (400.0 lbs) | |
| Fuel tank capacity | 2.5 l (0.66 US gal., 0.55 Imp gal.) | |
| Battery | 12V-22AH | |
| Engine | ||
| Engine model | Honda GXV340 K1 | |
| Displacement | 337 cm3 (20.6 cu-in) | |
| Bore x stroke | 82.0 X 64.0 mm (3.23 x 2.5 in) | |
| Max. horsepower | 11.0 HP (8.2 kW) at 3600 rpm | |
| Max. torque | 23.0 Nm (2.3 kg·m, 17.0 ft·lb) at 2,500 rpm | |
| Carburetor | Horizontal type, butterfly valve | |
| Cooling system | Forced-air | |
| Ignition system | Transistorized magneto ignition | |
| Lubricating system | Pressure and splash | |
| Starting system | Electric starter | |
| Stoping system | Ignition primary circuit ground | |
| Fuel used | Unleaded gasoline (octane number 86 or higher) | |
| Manual transmission | ||
| Groung speeds | First: 2.4 km/h (1.5 mph) Second: 3.7 km/h (2.3 mph) Third: 5.7 km/h (3.5 mph) Fourth: 7.0 km/h (4.3 mph) Fifth: 7.9 km/h (4.9 mph) Reverse: 2.8 km/h (1.7 mph) | |
| Hydrostatic type transmission | ||
| Groung speeds | Reverse: 2.7 km/h (1.7 mph) Mowing: 5.3 km/h (3.3 mph) Transport: 7.6 km/h (4.7 mph) | |
| Wheels and tires | ||
| Front tires size | 11×4.0-5 | |
| Front tires pressure | 98 kPa (1.0 kg/cm2, 14 psi) | |
| Rear tires size | 16×6.5-8 | |
| Rear tires pressure | 69 kPa (0.7 kg/cm2, 10 psi) | |
| Mower Deck | ||
| Deck size | 760 mm (30 in.) | |
| Height range | 25-90 mm (1-3.5 in.) | |
Maintenance data
| Engine | |
| Maximum speed | 3,400 ± 150 rpm |
| Idle speed | 1,750-1,950 rpm |
| Cylinder compression | 6.0-8.5 kg/cm2 (85-151 psi) at 600 rpm |
| Valve clearance | |
| Intake valve | 0.15 ± 0.02 (0.006 ± 0.001) |
| Exhaust valve | 0.20 ± 0.02 (0.008 ± 0.001) |
| Carburetor | |
| Main jet | #88 |
| Float height | 11.9-14.5 mm (0.47-0.57 in) |
| Pilot screw opening | 2-1/2 turns out |
| Oil system | |
| Oil type | Honda 4-stroke or an equivalent (SH or SJ) |
| Recommended oil | SAE 10W-30 |
| Oil capacity | 1.1 L (1.2 US gal, 1.0 lmp qt) |
| Ignition system | |
| Ignition timing | 20 ° B.T.D.C (Fixed) |
| Spark plug | NGK: BPR5ES NIPPONDENSO: W16EPR-U |
| Spark plug gap | 0.7-0.8 mm (0.028-0.031 in) |
| Primary ignition coil resistance | 0.7-0.9 Ω |
| Secondary ignition coil resistance | 6.3-7.7 kΩ |
| Ignition coil air gap | 0.4 ± 0.2 (0.016 ± 0.008) |
| Starter motor | |
| Brush length | 7.2 mm (0.28 in) limit: 3.5 mm (0.14 in) |
| Mica depth | 1.0 mm (0.04 in) limit: 0.2 mm (0.01 in) |
| Manual transmission lube | |
| Transmission oil type | Honda Motor Oil 10W30 |
| Transmission oil capacity | 2.8 L (2.96 quarts) |
| Hydrostatic transmission lube | |
| Transmission oil type | Honda hydrostatic transmission oil |
| Blade bolt tightening torque | |
| Central blade bolt | 50.0 Nm; 5.0 kg·m; 36.2 ft·lb |
| 12 x 25 mm bolts | 85.0 Nm; 8.5 kg·m; 61.5 ft·lb |
Attachments
| Honda 30″ mid-mount mower deck with 1-blade and manual lift | |
| Cutting width | 760 mm (30 in) |
| Overall width | 1,060 mm (42 in) |
| Cut height | 20-80 mm (1-3.5 in) |
| Cut positions | 6 |
Author:
Be the first to comment