The Honda F110 tiller, is equipped with small 2-stroke general-purpose Honda GE35 engine (34.4 cc; 2.11 cu.in.) and worm gear / warm wheel type transmission system. The engine uses a single-element air cleaner, horizontal carburetor with a butterfly valve, the centrifugal governor and recoil starter.
The Honda GE35 is a single-cylinder air-cooled 2-stroke internal combustion engine with 37.0 mm (1.46 in) cylinder bore and 32.0 mm (1.26 in) piston stroke. Compression ratio rating is 6.7:1. The engine produced 1.0 HP at 4,800 rpm of maximum output power and 1.7 Nm (0.175 kg·m) at 3,500 rpm of torque.
General information
| Tiller, Rotavator, Cultivator Specifications | |
| Model | Honda F110 |
| Dimensions (L x W x H): | 1115 x 460 x 960 mm (43.9 x 18.1 x 37.8 in) |
| Dry weight (without tines) | 16.0 kg (35.27 lbs) |
| Operating weight | 16.5 kg (36.237 lbs) |
| Engine | |
| Engine model | Honda GE35 |
| Displacement | 34.4 cm3 (2.11 cu-in) |
| Bore x stroke | 37 mm X 32 mm (1.5 x 1.3 in) |
| Max. horsepower | 1.0 HP at 4,800 rpm |
| Max. torque | 1.7 Nm (0.175 kg·m) at 3,500 rpm |
| Carburetor | Horizontal type, butterfly valve |
| Cooling system | Forced-air |
| Ignition system | Transistorized magneto ignition |
| Lubricating system | Gas/Oil mixture, Mixing ratio 100:1 |
| Starting system | Recoil starter |
| Stoping system | Ignition primary circuit ground |
| Fuel used | Unleaded gasoline (octane number 86 or higher) |
| Transmission and clutch | |
| Transmission | Worm gear / warm wheel |
| Clutch type | Internal expanding shoe |
Maintenance data
| Oil system | |
| Oil type | Honda 2-stroke |
| Engine oil capacity | Gas/Oil mixture, Mixing ratio 100:1 |
| Transmission oil | Idemitsu #420 |
| Transmission oil capacity | 60 cc (2.1 Imp oz) |
| Ignition system | |
| Spark plug | NGK: BMR-4A |
| Spark plug gap | 0.6-0.7 mm (0.024-0.028 in) |
Author:
Be the first to comment