Honda E900

Honda E900The Honda E900 is AC/DC, single phase, 4-pole portable generator with 900 VA of maximum power, 800 VA of rated power and 60Hz of rated frequency. The E900 generator is available with AC 115V and DC 12V rated voltage. The direct current terminals can be used for charging 12-volt automotive-type batteries 70 Ah and up.

The Honda E900 generator uses the G28EA single-cylinder gasoline engine with 68 cm3, (4.1 cu·in) of displacement. The engine has an overhead camshaft design, a flywheel magneto ignition system, and a splash-type oil system. The cylinder bore and the piston stroke are 49.0 mm (1.93 in) and 35.6 mm (1.40 in), respectively. The compression ratio rating is 8.3:1.

The engine produced 2.8 PS (2.08 KW; 2.8 HP) at 6,000 rpm of maximum horsepower and 2.0 PS (1.5 KW; 2.0 HP) at 5,000 rpm of rated power.

General information


Generator Specifications
Model Honda E900
Dimensions (L x W x H): 450 x 370 x 415 mm (17.7 x 14.6 x 16.3 in)
Dry weight 39.0 kg (76.0 lbs)
AC Rated voltage: 115V
AC Rated output: 800 VA (6.7A)
AC Maximum output: 900 VA
Rated frequency: 60 Hz
DC output: Only for charging automotive battery of 12V – 70Ah and up
Fuel tank capacity 2.6 L (0.7 US gal, 0.6 Imp. gal)
Model Honda G28
Displacement 68 cm3 (4.1 cu-in)
Bore x stroke 49.0 x 35.6 mm (1.93 x 1.40 in)
Max. horsepower 2.8 PS (2.08 KW; 2.8 HP) at 6,000 rpm
Max. torque
Fuel system Carburetor
Cooling system Forced-air
Ignition system Flywheel magneto ignition
Lubricating system Splash
Starting system Recoil starter
Stoping system Ignition primary circuit ground
Fuel used Unleaded gasoline (octane number 86 or higher)

Maintenance data

Oil system
Oil type Honda 4-stroke “SD”
Recommended oil SAE 5W-40, 20W-50
Oil capacity 0.7 L (0.74 US.qts, 0.62 Imp. qts)
Ignition system
Spark plug NGK: C-6HB
Spark plug gap 0.7 mm (0.028 in)
Author: Sergei Wers
About: Co-founder and CEO of a multi-brand auto repair shop (engine repair, chassis repair, body repair and painting) for over 15 years. I have been developing internet sites with technical specifications for more than seven years.

ATTENTION! Dear visitors, this is an informational database of technical specifications, we are not a parts supplier or a marketplace.

We try to use official documentation and verify the published data, but errors may occur. In addition, specifications of machinery and equipment may vary depending on markets and modifications. We do not recommend the use of this data for spare parts or repairs. Use official service manuals or parts catalogs for your product.

Be the first to comment

Leave a Reply

Your email address will not be published.